Kon Lighting Bestselling LED Underwater Lights

Kon Lighting: Your Best LED Underwater Lights Supplier in China

Kon Lighting is a professional manufacturer and supplier of LED outdoor lighting (including underwater LED lights). We can become your reliable partner and support your business through LED water lights.

In the past 10 years, Kon Lighting has been focusing on the development and production of LED water lamps. We provide stable LED underwater lighting quality and sell swimming pool lighting fixtures worldwide.

Every year, we develop new forms of LED water lights and track market trends. We can also produce OEM products for customers.

led underwater lights

About LED underwater lights

Underwater lights in pools

LED underwater lights are lighting fixtures that can work underwater and must be waterproof to IP68. They are commonly used for general lighting and landscape decoration in swimming pools, gardens, ponds, fountains, etc. Due to the fact that LED water lamps are used underwater and must withstand certain pressure, they are usually made of stainless steel, 8-10 mm thick tempered glass, high-quality waterproof joints, and silicone rubber sealing rings. LED underwater lights must be waterproof, dustproof, sealed, and corrosion-resistant.

LED Underwater Lighting Design

LED underwater light is an underwater lighting device that uses LED as the light source and is composed of a mixture of red, green, and blue. It is an ideal choice for fountains, theme parks, exhibitions, and commercial and artistic lighting. To improve the heat dissipation function of LED underwater lights, it is recommended to use underwater lights.

In order to achieve a good waterproof effect for LED underwater lamps, the protection effect of LED underwater lamps must reach IP68, and the lamps can be placed 5 meters below the water surface.

The LED underwater light is connected to the control system using a five-core wire. The entire system includes a DMX controller, distribution box, and lights that can be placed in water.

Underwater lights for fountain project
Underwater lights for fountain project

Most color-changing water lamps can work in the DMX control system. Each object has a separate address. The red, green, and blue indicators are composed of three corresponding DMA channels. There are two control modes: external control and internal control. Internal control does not require an external controller and can have different change modes (up to six), while external control must be equipped with an external DMX controller to achieve color changes. The applications on the market are also basically uncontrollable.

Most LED underwater lights use ultra-bright LEDs as light sources, which can emit 50000 hours of light. Good light source materials extend the service life of lamps and provide the most satisfactory lighting effect.

Precautions when using LED underwater lights

LED water lamp is a water lamp manufactured using LED technology. Compared with traditional underwater lighting fixtures, LED underwater lighting fixtures are more energy-efficient and environmentally friendly, with a wide variety of lighting fixtures and greater decorative properties, making them widely used in various landscape lighting systems. However, some issues with installing LED underwater lights require special attention.

LED underwater lights must be powered by a DC power source. Under the control of a DC power supply, the direct voltage drop of LED wall lights, LED floodlights, LED underwater lights, and LED underground lights will decrease as the temperature of the LED chip increases. So this won’t have too much impact. However, if powered by DC voltage, the current of the LED underwater light chip will increase with the temperature, and in severe cases, the LED underwater light may even burn. Therefore, LED water lamps must be powered by a DC power source.

underwater lights floodlight

Anti static measures must be taken. During the processing, production, and installation of LED diving lights, certain anti-static measures should be taken, such as grounding the workbench, and workers should wear anti-static clothing, rings, and gloves. Wait a minute. D. Other matters If conditions permit, it can be set. Meanwhile, for anti-static ion fans, ensure that the air humidity is about 65% during installation to avoid excessive dryness and static electricity generation. In addition, the anti-static ability of LEDs with different quality levels varies, while high-quality LED water lamps have stronger anti-static ability.

Pay attention to the sealing of LED products. No matter what LED lighting equipment is used outdoors, it faces the problem of moisture-proof and sealing. Especially for LED underwater lights used underwater. The problem of poor sealing directly affects the service life of LED underwater lights.

Технические показатели светодиодных подводных фонарей

Due to the special use of underwater color lights, they are an electrical product that works underwater, so there are also special requirements for their technical specifications.

Underwater inground Light

Firstly, the underwater multi-color light protection index.

The protection index of underwater colored lights can be divided into two aspects: dust-proof and waterproof. According to the IEC standard, internationally recognized safety marking symbols are as follows:

1. Dust Rating

According to national standards, dust-proof lighting fixtures are classified into 6 categories. Among them, level 6 is the highest, and the underwater color light should have a dust prevention level of level 6, with a label of IP6X.

  1. Waterproof levelAccording to national standards, the waterproof level of lighting fixtures is divided into 8 levels. The sixth layer is waterproof, the seventh layer is waterproof, and the eighth layer is pressure resistant. The eighth level is the highest, and the waterproof level of underwater colored lanterns must meet the requirements of the eighth level, with the symbol IPX8.

    According to the above two requirements, the dust prevention level of the colored underwater lantern is level 6, the waterproof level is level 8, and the label is IP68.

underwater lights for fountain

Secondly, safety indicators against electric shock.

The national standard has four categories of anti-shock indicators for lamps: Class O, Class I, Class II, and Class III. At the same time, the national standard clearly stipulates that underwater lighting fixtures in similar places such as swimming pools, fountains, and splash pools should be class III lamps for electric shock protection. The working voltage of its external and internal circuits should not exceed 12V.

Thirdly, the rated working voltage.

The rated working voltage of the lamp is the electrical parameter index of the lamp, which directly determines the use environment of the lamp, that is, the actual working voltage must be consistent with the rated working voltage. Otherwise, either the light source will be burned out due to the high voltage, or the lighting effect will not be achieved due to the low voltage.